Temperature Extension Cables Series
The temperature extension cable is used to connect the disposable temperature probe andmonitor to complete the signal connection and conversion.
Different brands of monitors correspond to different temperature extension cables.We have temperature extension cables suitable for all kinds of brand monitors,such as Mindray.Philips,GE,YSI,Comen etc.
Philips temperature extension cablePhilips temperature extension cable
Mindray temperature extension cable
Disposable SPO2 Sensor Probes Series
Basic performance of product
Lighting tube 660 nm/905nm/940 nm,maximum output power:2mw;
SPO2 test range:70%~100%;accuracy:±3%when 70%~89%,±2%when 90%~100%;
Pulse rate test range:30~245 bpm;accuracy:±3bpm when 30 bpm-245 bpm;
The maximum allowable temperature of the probe in contact with human body does not exceed 41ºC.
Application method
This product shallbe used in combination with the required model:For the matching compatible equipment,the degree of protection against electric shock of its applied part shall be at least F-type applied part.Use70%isopropyl alcohol for disinfection.Do not use undiluted bleaching agent(5%-5.25%sodiumhypochlorite)or other unspecified detergent since they will cause permanent damageto the probe.Dip a clean dry gauze into 70%isopropyl alcohol and use it to wipe the surface of the patient sensor andcable.Wipe the surface of patient sensor and cable with a clean dry gauze.
Remove the dust liner from the probe end and find the transparent window,below the window.The best positionfor optics to use this product is the index finger.The sensor can also be used on the little or middle finger andother fingers or big toe if there is an inconvenience.Caution:When selecting a transducer site,it is preferable to select an extremity that does not have an arterialline,blood pressure cuff,or transfusion cannula.
Adjust the direction of this product so that the dashed line in the sensor is in the center of the fingertip Wrapthe tape without the end of the cable around the fingertip.Note:Be sure to secure the cable to the back of yourhand.
Fold the cable end towards the finger so that the plastic window is directly opposite,andthen firmly wrap thetape around both sides of the finger.
Plug this product into the saturation tester and confirm whether it is operated correctly as described in thetester operation manual.
){kind=link}