Nc 7pin Super High Quality Blue Foam SpO2 Sensor

• Customization: Available
• Ethylene Oxide Sterilization: Ethylene Oxide Sterilization
• Group: Adult
• Model NO.: J78S003N-E
• 1: Customize
• 2: SpO2 Probes
• 3: Low Price
• Origin: Guangdong Shenzhen
• HS Code: 9018193090
• Production Capacity: 10000

Product Description

Temperature Extension Cables Series
The temperature extension cable is used to connect the disposable temperature probe andmonitor to complete the signal connection and conversion.
Different brands of monitors correspond to different temperature extension cables.We have temperature extension cables suitable for all kinds of brand monitors,such as Mindray.Philips,GE,YSI,Comen etc.
Philips temperature extension cablePhilips temperature extension cable
Mindray temperature extension cableMindray temperature extension cabl
Disposable SPO2 Sensor Probes Series
Basic performance of product

Lighting tube 660nm/905nm/940 nm,maximum output power:2mw;

SPO2 test range:70%~100%;accuracy:±3%when 70%~89%,±2%when 90%~100%;

Pulse rate test range:30~245 bpm;accuracy:±3bpm when 30 bpm-245 bpm;

The maximum allowable temperature of the probe in contact with human body does not exceed 41ºC.

Application method

This product shallbe used in combination with the required model:For the matching compatible equipment,the degree of protection against electric shock of its applied part shall be at least F-type applied part.Use70%isopropyl alcohol for disinfection.Do not use undiluted bleaching agent(5%-5.25%sodiumhypochlorite)or other unspecified detergent since they will cause permanent damage to the probe.Dip a clean dry gauze into 70%isopropyl alcohol and use it to wipe the surface of the patient sensor andcable.Wipe the surface of patient sensor and cable with a clean dry gauze.
Remove the dust liner from the probe end and find the transparent window,below the window.The best positionfor optics to use this product is the index finger.The sensor can also be used on the little or middle finger andother fingers or big toe if there is an inconvenience.Caution:When selecting a transducer site,it is preferable to select an extremity that does not have an arterialline,blood pressure cuff,or transfusion cannula.
Adjust the direction of this product so that the dashed line in the sensor is in the center of the fingertip Wrapthe tape without the end of the cable around the fingertip.Note:Be sure to secure the cable to the back of yourhand.

Fold the cable end towards the finger so that the plastic window is directly opposite,andthen firmly wrap thetape around both sides of the finger.
Plug this product into the saturation tester and confirm whether it is operated correctly as described in thetester operation manual.

Note:If the sensor cannot stably track the pulse condition,it may be because itis improperly placed,or thesensor is placed too thick,too thin,or has significant pigmentation,or the color is too light due to otherreasons(e.g..due to the use of externally colored products such as nail polish,stains,or tinted foundation),sothat normal light cannot be transmitted.In any of these cases,reposition the sensor or use a different type ofsensor on a different site.
Intended use
The product is indicated for single use to collect and transmit signal of SPO2 and pulse rate of patient,usedwith compatible monitors or oximeter.
Operation principle,function and structure
The patient sensor end of the product is attached on the patient's index finger(Thumb,middle finger orothers,great toes),and the device connector is connected to compatible monitors or oximeter with SPO2extension cord.The product adopts 660nm red light and 905nm Infrared light as incident light source,tests lightintensity through tissue to obtain SPO2 value as wellas pulse rate.